Wijzigingen aan stap #1
Bewerken voor Megan Bolling —
Bewerking goedgekeurd door Megan Bolling
- Voor
- Na
- Ongewijzigd
Stap regels
| - | [* black] Using a hex point screwdriver, unscrew the ten screws lining bottom cover and remove bottom cover. |
|---|---|
| + | [* black] Using a hex point screwdriver, unscrew the ten screws lining the bottom cover. Then proceed and remove the bottom cover. |
| [* black] There are two length of screws. Eight screws are 3mm and two are 5mm. The two 5mm screws always go into the two center holes along the back edge. |