Ga door naar hoofdinhoud

Wijzigingen aan stap #1

Bewerking door Adam O'Camb

Bewerking goedgekeurd door Adam O'Camb

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* red] The only thing connected to the daughterboard down as of now isDisconnect the white wire to the side. Use tweezers to diconnect itantenna cable.
[* black] Carefully pry the daughterboard out using tweezers and remove it from the device.
[* icon_caution] The board is also glued to the casingcase so go slowly and be careful not to use excessive forcetear any cables. If the board does not come out easily, try heating the case where the board is glued.
[* red] The only thing connected to the daughterboard down as of now isDisconnect the white wire to the side. Use tweezers to diconnect itantenna cable.
[* black] Carefully pry the daughterboard out using tweezers and remove it from the device.
[* icon_caution] The board is also glued to the casingcase so go slowly and be careful not to use excessive forcetear any cables. If the board does not come out easily, try heating the case where the board is glued.