iPad 6 Wi-Fi LCD Replacement stap #5 geschiedenis

	[* red] Remove the single 2.3 mm Phillips #000 screw securing the battery connector to the logic board.
	[* icon_note] To reduce the risk of a short, you can use a battery isolation pick to disconnect the battery.
-	[* icon_caution] ~~The battery isolation pick or battery blocker is an outdated way of isolating the battery, as~~ you ~~risk damaging~~ the battery ~~pins underneath the logic board~~. ~~If you use this method~~, ~~take extreme care to insert it gently and straight~~ in ~~the direction of the logic board~~. ~~Do not twist or swing the pick side to side.~~
+	[* icon_caution] Be very careful when you isolate the battery using a battery blocker. The battery contacts are easily damaged, resulting in irreversible damage.
	[* black] Slide a battery isolation pick underneath the battery connector area of the logic board, and leave it in place while you work.