Ga door naar hoofdinhoud

Microsoft Surface Pro 5 Kickstand Replacement

Wat je nodig hebt

  1. Microsoft Surface Pro 5 Kickstand Replacement, Kickstand: stap 1, afbeelding 1 van 3 Microsoft Surface Pro 5 Kickstand Replacement, Kickstand: stap 1, afbeelding 2 van 3 Microsoft Surface Pro 5 Kickstand Replacement, Kickstand: stap 1, afbeelding 3 van 3
    • Lift the kickstand about 90º to reveal the hinges.

  2. Microsoft Surface Pro 5 Kickstand Replacement: stap 2, afbeelding 1 van 2 Microsoft Surface Pro 5 Kickstand Replacement: stap 2, afbeelding 2 van 2
    • Remove the four 2.7 mm T3 Torx screws, two from each hinge.

  3. Microsoft Surface Pro 5 Kickstand Replacement: stap 3, afbeelding 1 van 2 Microsoft Surface Pro 5 Kickstand Replacement: stap 3, afbeelding 2 van 2
    • Lower the kickstand to about a 15-30º angle from the device.

    • Gently pull the kickstand away from the device, rocking left to right to disengage the adhesive tabs connecting the kickstand to the device.

    • During reassembly, be sure to reinsert the two adhesive tabs into the slots on the back of the device before installing the screws in the hinges.

Conclusie

To reassemble your device, follow the above steps in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

Één andere persoon heeft deze handleiding voltooid.

Sarah Westberg

Lid sinds: 03/11/19

23.134 Reputatie

70 handleidingen geschreven

Team

iFixit Lid van iFixit

Staff

135 Leden

16.817 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 6

Afgelopen 7 dagen: 21

Afgelopen 30 dagen: 58

Altijd: 6,373