Repareer je spullen Gemeenschap Winkel

Logitech G502 Proteus Core Mouse Feet Replacement

Inleiding

There may come a time when the feet of your mouse become worn or torn and you want to replace them. Follow this guide to replace the feet on your G502 Proteus Core Mouse.

The feet of your mouse needs to be intact for the mouse to be able to glide smoothly on your mouse pad. This is important for competitive games where mouse movements need to be quick and precise.

Wat je nodig hebt

  1. Logitech G502 Proteus Core Mouse Feet Replacement, Mouse Feet: stap 1, afbeelding 1 van 3 Logitech G502 Proteus Core Mouse Feet Replacement, Mouse Feet: stap 1, afbeelding 2 van 3 Logitech G502 Proteus Core Mouse Feet Replacement, Mouse Feet: stap 1, afbeelding 3 van 3

    • Use your fingers or a nylon spudger to peel the old feet off all three corners where the screw holes are exposed.

    Bewerken

  2. Logitech G502 Proteus Core Mouse Feet Replacement: stap 2, afbeelding 1 van 3 Logitech G502 Proteus Core Mouse Feet Replacement: stap 2, afbeelding 2 van 3 Logitech G502 Proteus Core Mouse Feet Replacement: stap 2, afbeelding 3 van 3

    • Peel the backing off the new mouse feet to reveal the adhesive.

    Bewerken

  4. Logitech G502 Proteus Core Mouse Feet Replacement: stap 3, afbeelding 1 van 3 Logitech G502 Proteus Core Mouse Feet Replacement: stap 3, afbeelding 2 van 3 Logitech G502 Proteus Core Mouse Feet Replacement: stap 3, afbeelding 3 van 3

    • Apply the new mouse feet to their designated areas based on shape.

    Bewerken

  5. Logitech G502 Proteus Core Mouse Feet Replacement: stap 4, afbeelding 1 van 1

    • Apply even pressure across the mouse feet to ensure adherence.

    Bewerken

  6. Logitech G502 Proteus Core Mouse Feet Replacement: stap 5, afbeelding 1 van 1

    • Let adhesive sit for about 5-10 minutes with applied pressure.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

4 andere personen hebben deze handleiding voltooid.

Auteur

met 6 andere bijdragers

Sage Farray

Lid sinds: 04/10/17

539 Reputatie

3 handleidingen geschreven

Medailles: 13

+10 andere badges

Team

UW Tacoma, Team S3-G1, Liner Spring 2017 Lid van UW Tacoma, Team S3-G1, Liner Spring 2017

UWT-LINER-S17S3G1

4 Leden

11 handleidingen geschreven

Één opmerking

You completely omitted half of the feet located on the mouse. The ones left out are the 3 located on the removable panel: there are 2 “v” shaped ones around the sensor and the one to the right of the “v” shapes.

Robert - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 9

Afgelopen 30 dagen: 38

Altijd: 10,900