Ga door naar hoofdinhoud
Lenovo V15-ADA Back Panel Assembly Replacement

Lenovo V15-ADA Back Panel Assembly Replacement

Tyler Kelly

Tyler Kelly en 5 andere bijdragers

Voor het laatst geüpdatet op January 20, 2025

2 - 5 minuten
Gemiddeld
Verwarrende Tekst

To make any repairs on the Lenovo V15-ADA device, you must take the back panel off first. Below are the steps to remove the back panel.

Wat je nodig hebt

Gereedschap

  1. Lenovo V15-ADA Back Panel Assembly Replacement, Back Panel Assembly: stap 1, afbeelding 1 van 2 Lenovo V15-ADA Back Panel Assembly Replacement, Back Panel Assembly: stap 1, afbeelding 2 van 2
    • Remove the 10 marked screws using a Phillips #1 screwdriver from the back plate.

    • M2.5 × 7 mm, Phillips-head (6) (RED circles)

    • M2.5 × 4 mm, Phillips-head (4) (ORANGE circles)

  2. Lenovo V15-ADA Back Panel Assembly Replacement: stap 2, afbeelding 1 van 2 Lenovo V15-ADA Back Panel Assembly Replacement: stap 2, afbeelding 2 van 2
    • After all 10 screws have been removed, insert a spudger between the bottom plate and the housing and slide across.

    • Repeat for all 4 sides until loose.

    • Pop off the back plate and set aside.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Tyler Kelly

Lid sinds: 02/20/24

139 Reputatie

1 Handleiding geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 9

Altijd: 248