Ga door naar hoofdinhoud

Onderdelen

Geen onderdelen opgegeven.

  1. Slide the battery cover release towards top of phone. Place one finger at each side of the battery cover.
    • Slide the battery cover release towards top of phone.

    • Place one finger at each side of the battery cover.

    • Lift and remove the battery cover.

  2. Place a finger at the top corner of the battery and lift out of the phone. Place a finger at the top corner of the battery and lift out of the phone.
    • Place a finger at the top corner of the battery and lift out of the phone.

  3. Use the spudger to lift up the two screw covers at the top of the phone. Remove all four Phillips#00 (3.3mm) screws with screwdriver.
    • Use the spudger to lift up the two screw covers at the top of the phone.

    • Remove all four Phillips#00 (3.3mm) screws with screwdriver.

  4. Use the spudger to lift up the rear case from the phone. Note: Rear case is connected on all sides and will have to be detached on all sides before removal. Remove the rear case from the device.
    • Use the spudger to lift up the rear case from the phone.

    • Note: Rear case is connected on all sides and will have to be detached on all sides before removal.

    • Remove the rear case from the device.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Matthew Cataldo

Lid sinds: 23-01-12

1 Reputatie

1 Handleiding geschreven

Team

Cal Poly, Team 3-29, Amido Winter 2012 Lid van Cal Poly, Team 3-29, Amido Winter 2012

CPSU-AMIDO-W12S3G29

4 Leden

14 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 0

Altijd: 497