Ga door naar hoofdinhoud
Homedics UHE-CMP15 Wick Replacement

Homedics UHE-CMP15 Wick Replacement

Dylan

Dylan en 2 andere bijdragers

Voor het laatst geüpdatet op January 2, 2024

1 minuut
Zeer eenvoudig

If your humidifier has stopped absorbing water, you might need to replace the old wick from the humidifier with a new one. For this guide, you do not need any tools but you do need a replacement wick to place inside the lid.

  1. Homedics UHE-CMP15 Wick Replacement, Wick: stap 1, afbeelding 1 van 1
    • Unscrew the top half of the device from the container and place the lid upside down.

    • The container should unscrew counter clockwise

  2. Homedics UHE-CMP15 Wick Replacement: stap 2, afbeelding 1 van 1
    • Pull the wick holder out from the bottom of the lid.

    • Grasp onto the plastic wick holder and pull upwards until it pops free.

  3. Homedics UHE-CMP15 Wick Replacement: stap 3, afbeelding 1 van 1
    • Remove the old wick from the wick holder.

    • Tilt the wick holder to the side and gently slide the wick out of its container.

  4. Homedics UHE-CMP15 Wick Replacement: stap 4, afbeelding 1 van 1
    • Place new wick into the wick holder.

    • Grab a replacement wick from the box the humidifier came in and gently slide it into the wick holder.

  5. Homedics UHE-CMP15 Wick Replacement: stap 5, afbeelding 1 van 1
    • Insert wick holder back into the lid.

    • Grab the wick holder and insert it into the lid on the end where the wick itself enters the lid and the spring side remains in the air.

Conclusie

To reassemble your device, screw the lid back onto the container and turn it on.

Dylan

Lid sinds: 10/30/23

337 Reputatie

3 handleidingen geschreven

Team

UMass Dartmouth, Team 3-6, Konn Fall 2023 Lid van UMass Dartmouth, Team 3-6, Konn Fall 2023

UMASSD-KONN-F23S3G6

4 Leden

5 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 3

Afgelopen 7 dagen: 9

Afgelopen 30 dagen: 28

Altijd: 325