Repareer je spullen Gemeenschap Winkel

Holmes box fan motor replacement

Inleiding

This is a very simple guide that will help you dissasemble and replace the motor of your Holmes box fan, this process is easy and it only requires a screwdriver and a new motor to install.

Wat je nodig hebt

  1. Holmes box fan motor replacement, Motor: stap 1, afbeelding 1 van 3 Holmes box fan motor replacement, Motor: stap 1, afbeelding 2 van 3 Holmes box fan motor replacement, Motor: stap 1, afbeelding 3 van 3

    • The first step is to make sure you unplug your fan from the outlet.

    • Make sure you also unplug the power cord from the back of the fan.

    Bewerken

  2. Holmes box fan motor replacement: stap 2, afbeelding 1 van 2 Holmes box fan motor replacement: stap 2, afbeelding 2 van 2

    • Now that your fan is unplugged, lay it flat with the brand label facing upward.

    • Next is to remove the front cover.

    • Remove the six screws from the perimeter of the cover in order to remove the front cover.

    Bewerken

  3. Holmes box fan motor replacement: stap 3, afbeelding 1 van 2 Holmes box fan motor replacement: stap 3, afbeelding 2 van 2

    • Next is the back cover.

    • Flip over the fan so you have access to these six screws.

    • Remove the six screws from the perimeter of the cover in order to remove the back cover.

    Bewerken

  5. Holmes box fan motor replacement: stap 4, afbeelding 1 van 1

    • Remove these four screws in order to remove the motor and fan blades from the housing.

    Bewerken

  6. Holmes box fan motor replacement: stap 5, afbeelding 1 van 1

    • The housing should now be able to lift away from the motor and fan blade.

    Bewerken

  7. Holmes box fan motor replacement: stap 6, afbeelding 1 van 3 Holmes box fan motor replacement: stap 6, afbeelding 2 van 3 Holmes box fan motor replacement: stap 6, afbeelding 3 van 3

    • The next step is to remove the mounts that held the motor to the housing.

    • Remove these four screws to remove the mounts.

    Bewerken

  8. Holmes box fan motor replacement: stap 7, afbeelding 1 van 2 Holmes box fan motor replacement: stap 7, afbeelding 2 van 2

    • Now you are able to remove the motor from the fan blades.

    • Be careful, if you used your fan recently the motor may be quite hot.

    Bewerken

  9. Holmes box fan motor replacement: stap 8, afbeelding 1 van 1

    • Now you can insert your new motor and you are done!

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

5 andere personen hebben deze handleiding voltooid.

Auteur

met 1 andere bijdrager

Max Cossalter

Lid sinds: 09/29/15

311 Reputatie

1 Handleiding geschreven

Medailles: 7

+4 andere badges

Team

Cal Poly, Team 15-4, Green Fall 2015 Lid van Cal Poly, Team 15-4, Green Fall 2015

CPSU-GREEN-F15S15G4

4 Leden

4 handleidingen geschreven

4 opmerkingen

Where might one find a replacement motor for a older box fan

Chris Cook - Antwoord

Also, I would like to know where to get a replacement motor, as shown in step 4.

Vince Doriean - Antwoord

Great guide! Upon reassembling, I noticed that the center of the propeller touches the front grill where it says Holmes. Anyone know if they rub on each other by design?

Zeev - Antwoord

My version of the fan came with a similar cord, however the female end had a bump in the center on the end that latches into the fan. Without shaving that piece off, the plug doesn’t detach without taking it apart and prying it out.

applejack_ - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 9

Afgelopen 30 dagen: 47

Altijd: 12,470