HP Chromebook 11 G3 Keyboard Mount Replacement

Voor het laatst geüpdatet op May 7, 2024

2 minuten

Gemiddeld

Inleiding

This guide walks through removing the upper case and keyboard mount. This guide requires a Phillips screwdriver, a plastic opening tool, a spudger, and tweezers.

Wat je nodig hebt

Onderdelen

HP Chromebook 11 G3/G4 Palmrest Keyboard Assembly
Bekijk

Gereedschap

Toon meer…

Stap 1 Keyboard Mount

HP Chromebook 11 G3 Keyboard Mount Replacement, Keyboard Mount: stap 1, afbeelding 1 van 2

HP Chromebook 11 G3 Keyboard Mount Replacement, Keyboard Mount: stap 1, afbeelding 2 van 2

Flip the laptop upside down so that the lid lies flat on the table.
Remove the nine 6mm Phillips #00 screws that line the border.

Bewerken

Stap 2

Gereedschap gebruikt in deze stap:

Tweezers

$4.99

In winkelwagen

Remove the two rubber feet closest to the hinge using tweezers.
Remove the two 6mm Phillips #00 screws revealed under these rubber feet.
The rubber feet may tear while removal; preventing this can be difficult, but it won’t harm the laptop. If desired, replace these rubber feet during reassembly.

Bewerken

Stap 3

Flip the laptop so it is in the upright position.
Open the lid.
Unsnap the keyboard mount along the border of the laptop using a plastic opening tool.
This may require more force than expected. Hearing loud clicks as the plastic opening tool slides along the seam is normal.

Bewerken

Stap 4

HP Chromebook 11 G3 Keyboard Mount Replacement: stap 4, afbeelding 3 van 3

Tilt the keyboard mount up.
Use a spudger to flip up the two ZIF connector retaining flaps for the ribbon cables that connect the keyboard mount to the motherboard.
Gently remove both ribbon cables.