Inleiding

Use this guide to remove the lens mount ring. This particular Canon SLR has a plastic lens mount ring that can wear faster than the metal lens mount rings on other models.

Onderdelen

Geen onderdelen nodig.

  1. Remove the two 3mm (1/8") black screws from the side cover using a #00 Phillips screwdriver.
    • Remove the two 3mm (1/8") black screws from the side cover using a #00 Phillips screwdriver.

    Voeg opmerking toe

  2. On the bottom, remove the 6mm (13/64") screw with the #00 Phillips Screwdriver.
    • On the bottom, remove the 6mm (13/64") screw with the #00 Phillips Screwdriver.

    • Pry up the panel; starting from the front/bottom corner, as indicated.

      • There's a concealed lip, under the opposite edge.

    Voeg opmerking toe

    • Remove three medium length screws from the bottom of the camera

    Voeg opmerking toe

  3. Verspreid de kerstsfeer
    Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
    Verspreid de kerstsfeer
    Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
    • Remove the two medium length screws on the front panel of the camera above the lens mount.

    • Once you done, you may use the Spudger to panel from non-grip side.

    • If you start on the grip side, it will be more challenging to loosen the panel.

    Voeg opmerking toe

    • Remove the five silver screws from the lens mounting ring using a Phillips screwdriver.

    Voeg opmerking toe

    • Use your fingers to remove the lens mounting ring.

    • There is a small metal button housed in the ring (red square). Be careful not to lose this piece when removing the ring.

    Voeg opmerking toe

    • Use a pair of tweezers to remove the spring on the lens mounting ring.

    Voeg opmerking toe

    • Use a pair of tweezers to remove the gold metal ring.

    • Take note of the ring's orientation for re-installing it.

    Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

3 andere personen hebben deze handleiding voltooid.

Daniel Bussone

Lid sinds: 28-01-11

1.215 Reputatie

11 handleidingen geschreven

Team

Cal Poly, Team 3-41, Regan Winter 2011 Lid van Cal Poly, Team 3-41, Regan Winter 2011

CPSU-REGAN-W11S3G41

2 Leden

11 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 11

Afgelopen 30 Dagen: 51

Altijd: 6,568