Inleiding
Ga naar stap 1Look into a High-end true wireless earphone.
-
-
In this cavity, there is a speaker unit and a logic board.
-
The newly designed 9.2mm speaker unit is protected by a transparent cover.
-
-
-
Battery was located in a definite different space to the logic board.
-
If you want to change the battery, you have to open the cavity behind.
-
Bereid je voor op toekomstige reparaties
Winkelen
5Gids Commentaar
Nothing special, warm it and twist it until open by your hands. I know it’s hard, but be careful not to damage the parts.
Where to get the batteries for the buds and the case if one might try this?
I also have dead Beoplay E6. Can you provide a diagram for the 3 button inline unit as the headphone will not turn on (no lights) although 5v getting to the inline unit??
I also have a dead Beoplay E6 and would like to attempt to replace the battery. I am new in this area but is DIY person. That's why I don't want to give up on this very BT earpiece just yet. Has any of you been successful in doing so? If yes, please share some pictures and tips. If you also know the battery model, it will be a big help for me to buy it ahead of time. Thanks! - OLIVER
