Onderdelen

Geen onderdelen nodig.

  1. Remove the following six screws:
    • Remove the following six screws:

      • Six 4 mm Phillips #0 using a phillips scredriver

    • Remove the following one screw:

      • One 14 mm Phillips #0 using a phillips screwdriver

    • The 14mm screw goes in the center.

    There are also two other screws under the rubber feet above the battery.

    digg1024 - Antwoord

  2. Use a plastic or metal spudger to separate the keyboard from the back panel and lift the keyboard out of place.
    • Use a plastic or metal spudger to separate the keyboard from the back panel and lift the keyboard out of place.

    How exactly does the keyboard pod out ? It doesn’t come off at the screen hinge.

    Clément Marshall - Antwoord

    • Remove the black foam and adhesive located on top of the hard drive.

    Voeg opmerking toe

    • Remove the following four screws:

      • Four 4 mm Phillips #0 using a phillips screwdriver.

    Voeg opmerking toe

    • Slide out the hard drive

    Slide the drive to the right, away from the sata connectors at the left.

    Clément Marshall - Antwoord

Conclusie

To reassemble your device, follow these instructions in reverse order.

3 andere personen hebben deze handleiding voltooid.

Vanessa Garcia

Lid sinds: 22-01-15

1.550 Reputatie

6 handleidingen geschreven

Team

Cal Poly, Team 21-24, Maness Winter 2015 Lid van Cal Poly, Team 21-24, Maness Winter 2015

CPSU-MANESS-W15S21G24

4 Leden

6 handleidingen geschreven

Één commentaar

You FORGOT TO MENTION that one must remove the 2 Rubber feet to get at 2 more screws :-(((((((

Matthew Miller - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 3

Afgelopen 7 Dagen: 14

Afgelopen 30 Dagen: 84

Altijd: 6,399