Ga door naar hoofdinhoud

TV turns black randomly but still has sound? But also works sometimes.

My tv sometimes works and then randomly turns black with the sound on. I have done all the resets, software updates, and checked hdmi ports. Sometimes the TV works like normal and then reverts back to the same issue. Video included

Update (06/03/23)

Block Image

This is what it looks like. If you look closely it's glitchy and eventually the screen turns black

@jayeff

Update (06/03/23)

I'm not sure but this is a video of me trying to turn the tv on after turning black

@jayeff

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 2
1 Opmerking

Same exact issue was this ever resolved ?

door

Voeg een opmerking toe

2 Antwoorden

Gekozen oplossing

Hi @annanguyen60077,

What is the model number of the TV?

When the TV screen turns black but with the audio still being heard, try shining a flashlight at an angle close to the screen and check if you can see images at all.

If you can then there's a backlight problem i.e. the backlight LEDs are being turned off for some reason, faulty power board or mainboard perhaps.

Not sure if this will work as I don't know the model number, but disconnect the power to the TV and then remove the back cover from the TV.

Disconnect the mainboard - power board cable at the power board end.

Reconnect the power to the TV and turn it on.

The screen backlight lights should turn full on and stay on.

There will be no images or audio as the mainboard has been disconnected.

Be safety aware as there is exposed lethal AC voltage on the power board so turn off the TV and disconnect the power before touching anything in the back of the TV.

Was dit antwoord nuttig?

Score 1

6 opmerkingen:

qn82q6fnafxza

door

@jayeff, I tried that and I don't think it's a back light issue. Its completely back with no picture visible with light shining on it. It's odd because sometimes it'll work and the picture is normal and then it'll start glitching and turn black with the sound still on again.

Model: QN82Q6FNAFXZA

door

@annanguyen60077

Please Unaccept my answer as it didn't resolve the problem.

No video visible at all when the screen is black, may be a tcon board or mainboard

You could try leaving the back cover off and directing a fan at the tcon board first and see if it stays on without glitching. It may be that a component is overheating.

The tcon board is the board connected between the mainboard and the screen and has 4 ribbon cables connecting to the screen

Worth a try.

door

@jayeff thank you! I'll try that. I just can't justify throwing out an 82 inch tv less than 5 years old. It seems like a high possibility. It's odd because at times it'll work like normal and then after a couple hours it'll turn black again

door

@annanguyen60077

That's the problem with intermittent faults. They're difficult to isolate at first as it takes time to narrow down to exactly where the problem may be as you have to wait for it to occur and then it has to stay like that while you check things out.

It's easier if it totally failed and stayed that way ;-)

door

1 commentaar meer tonen

Voeg een opmerking toe

@annanguyen60077 looking at your 2nd video at around the 0:06 mark, this looks like you are having actual panel issues. The way it powers the LCD screen up looks very much like failed/failing driver boards. At this time, for as long as you can still watch it, I would leave it. Once it fails you can remove the back cover and look at those boards. See if you can determine bad components etc. A "Tape Off' may also resolve this.

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

Anna Nguyen Matthews zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 39

Afgelopen 7 dagen: 236

Afgelopen 30 dagen: 1,000

Altijd: 4,103