There is a thin, black, flexible tape used to secure the sockets that the ribbon cables plug into. The tape keeps the cable from pulling out as well as holding down the release lever. The tape is very delicate and conforms to wrap the object it is attached to.
See here
Is dit een goede vraag?
Rep: 551
9
8
13
If your on about replacing the tape after a repair you can use kapton tape.
Was dit antwoord nuttig?
I am aware. Clearly, Motorola did not think this was the optimum solution. The tape they used totally formed around the socket and because it was stretchy it pulls the cable into the ribbon cable connector. My suspicion is that this also provides significant intrusion protection from moisture, contaminants, etc. So far no one can even tell me what this tape is called.
Afgelopen 24 uren: 0
Afgelopen 7 dagen: 1
Afgelopen 30 dagen: 5
Altijd: 137
@jayhovajay44937 post a picture of what that all looks like Voeg afbeeldingen toe aan een bestaande vraag
door oldturkey03
@oldturkey03 Done
The tape tends to self-destruct. It is very thin, plyable and sticky. It wraps around components it is placed on sealing away moisture and providing strain relief.
door Jay Hova (Jay Hova 4x4)