Ga door naar hoofdinhoud

Model A1312 / Mid 2010 / 3.2 GHz Core i3 or 2.8 & 3.6 GHz Core i5 or 2.93 GHz Core i7, ID iMac11,3

373 Vragen Bekijk alle

Procedure how to replace SSD drive in a 2010 27" iMac

Tutorial to replace the SSD in a 2010 27’’ iMac.

Thank You

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

1 Antwoord

Het nuttigste antwoord

There are two directions possible here. The first is to replace your current 3.5” HDD with a 2.5” SSD. If the drive has failed that is what I would do following this guide iMac Intel 27" EMC 2390 Hard Drive Replacement

If on the other hand you are trying to improve you’re systems performance then adding the SSD would be a smarter direction! Following this guide Installing iMac Intel 27" EMC 2390 Dual HDD or SSD Drive

In either case you will need to make sure you get the correct SSD for your system. Most drives today are fixed speed SATA III (6.0 Gb/s) whereas your systems SATA port requires a SATA II (3.0 Gb/s) drive as its I/O is not able to handle the higher data rate of the faster drive. As it turnout there are a few auto sense drives which can match the systems I/O needs as an example a Samsung 870 EVO SSD Note the Interface line clearly states it supports the older SATA speeds: SATA 6 Gb/s Interface, compatible with SATA 3 Gb/s & 1.5 interfaces. Make sure which ever drive you go with clearly states support for the slower SATA II (3.0 Gb/s) data rate.

iMac Intel 27" EMC 2390 Hard Drive Afbeelding


iMac Intel 27" EMC 2390 Hard Drive Replacement



40 minutes - 2 hours

iMac Intel 27" EMC 2390 Dual Drive Kit Afbeelding


Installing iMac Intel 27" EMC 2390 Dual HDD or SSD Drive



1 - 2 hours

Was dit antwoord nuttig?

Score 1
Voeg een opmerking toe

Voeg je antwoord toe

jacques vaillancourt zal eeuwig dankbaar zijn.

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 22