Ga door naar hoofdinhoud

low-cost notebook with at least basic gaming power, includes the models G50-30, G50-45, G50-70, G50-80.

38 Vragen Bekijk alle

My laptop is not turning on. It just showing repairing hard disk

My laptop is not working. When i turn on it just shows repairing and goes to login page and just stuck there. Even if i type the password it ask again to type password. My laptop is idapad z510.

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
2 opmerkingen

Hi!

Did you drop your laptop recently?

door

No i havent dropped it. But there is a problem if the laptop is charging if i move the laptop it just turns off with a sound

door

Voeg een opmerking toe

2 Antwoorden

Gekozen oplossing

Hi,

You could try removing the HDD from the laptop and inserting it in another computer as a storage drive to try and get your data from the HDD before the drive completely fails.

There is a lot of information online how to do this. Here’s just one example.

To remove the HDD from your laptop, here’s a link to the service manual for your laptop. Scroll to p.46 to view the necessary pre-requisite steps and then the procedure to remove the HDD.

Was dit antwoord nuttig?

Score 2

1 Opmerking:

I will definitely try this.

door

Voeg een opmerking toe

Hi there, it seems to me as there is corruption in the hard drive, have you dropped it recently? or has the hard drive been impacted with some sort of force?

In this case you may need to replace the hard drive.

Was dit antwoord nuttig?

Score 1

4 opmerkingen:

what about the data and os

door

As jayeff suggested, try using the hard drive in your laptop in another laptop, if the other laptop boots fine with the hard drive from your laptop, it indicates there is an issue with the laptop itself.

door

Hi @jtblck ,

The host computer will boot OK as the "faulty" 2nd HDD is not part of the boot process. It is just additional hardware

You can't substitute the HDD in a host computer with the "faulty" HDD as the OS on the "faulty" HDD is configured for the motherboard hardware that it was originally connected to and it won't boot as there are too many differences unless it was an identical computer. (if this is what you mean)

You can however connect the "faulty" HDD as a 2nd HDD in another computer and then boot using the existing installed HDD and check if the 2nd HDD is detected, mounted and readable in the computer.

door

Huh, I've used other hard drive in other laptops like I mentioned before, and it seems to work well every time for me. But thanks, you learn something new every time. :)

door

Voeg een opmerking toe

Voeg je antwoord toe

Revanth Krishna zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 4

Altijd: 94