Ga door naar hoofdinhoud

Reparatiehandleidingen voor beeldschermen (of monitoren) van computers of andere apparaten met video-output.

505 Vragen Bekijk alle

HP desktop display shows for 2 seconds then shuts off

So I have an HP desktop display that comes on for about 2 seconds then seems to dim and lose its connection to the PC showing the display details in what looks to be minimal brightness then shuts down in about the same time frame

I tried many things (known-good cables, different PC, picture does show normally for a few seconds so I don’t think it’s the backlight, tried to change settings but it powers down before I can, etc.) and believe I narrowed it down to the power supply circuit board. I would like a second opinion but that’s what my diagnosis would be. Could anyone else give me some input as to what else I should try before having to change the whole board or the components on the board?

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

1 Antwoord

Gekozen oplossing

@blaked89

depending on the exact model number, a failed power supply can do this. Check for leaking caps etc. I have seen it where the video board was faulty and turned off the power board, but far less common than a bad power board.

Was dit antwoord nuttig?

Score 1

1 Opmerking:

Dang it, I was hoping it was something simple I missed lol

That sounds like the problem to me too, I’ll start testing and see what I can find.

Thanks again.

door

Voeg een opmerking toe

Voeg je antwoord toe

Blaked89 zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 3

Afgelopen 30 dagen: 11

Altijd: 624