Screen does not turn on at all (tried replacing charging port as well)

Question

iPhone 6

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Vragen Bekijk alle

robert7kim7 @robert7kim7

Rep: 1

Gepost: 19 sep. 2017

Opties

Screen does not turn on at all (tried replacing charging port as well)

I had replaced my sister's battery recently as it was starting to lose its charge very quickly. However, in a month or so, she comes back with a broken phone that does not turn on or is recognizable to itunes either.

She told me she had used a portable fan that plugs into the bottom of the phone (a cheap chinese brand I think) which I speculated is what caused the damage to the phone. What do you guys think? Or, it's just coincidence and happened to died right after.

But anyways, so I thought it was the charging port that broke. So I replaced that, and still no luck. Also, tried hard resetting as well. If you guys could give any ideas on this, that'd be incredible!

Thanks,

Robert

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee

Score 0

Voeg een opmerking toe

3 Antwoorden

Gekozen oplossing

Minho @refectio

Rep: 221,4k

15

289

807

Gepost: 19 sep. 2017

Opties

You're probably right. Cheap peripherals can draw too much current or cause voltage spikes that damage the charging circuit (Tristar).

This will have to be repaired by a shop that does micro-soldering work.

Was dit antwoord nuttig?

Ja Nee

Score 3

5 opmerkingen:

Thank you for the response. How much do you think it would cost to repair that?

19 sep. 2017 door robert7kim7

Dealing with a reputable micro-solderer will cost you about $100 - $150. Some may charge more and some less.

There are a few reputable micro-solderers who frequent this forum or you can search Google. You can check out my profile if you'd like, at the very least it will serve as a data point

19 sep. 2017 door Minho

@mayer @oldturkey03 not sure if this is okay...but answering a direct question. Let me know.

19 sep. 2017 door Minho

Robert Actually this is just the type of repair that Minho specializes in. @refectio You're fine with me, you didn't recommend yourself or post your web link (which is in your profile), right?

19 sep. 2017 door mayer

@refectio @mayer looks good to me as well.

19 sep. 2017 door oldturkey03

Voeg een opmerking toe

Thank you for the response. How much do you think it would cost to repair that? — robert7kim7
Dealing with a reputable micro-solderer will cost you about $100 - $150. Some may charge more and some less.

There are a few reputable micro-solderers who frequent this forum or you can search Google. You can check out my profile if you'd like, at the very least it will serve as a data point — Minho
@mayer @oldturkey03 not sure if this is okay...but answering a direct question. Let me know. — Minho
Robert Actually this is just the type of repair that Minho specializes in. @refectio You're fine with me, you didn't recommend yourself or post your web link (which is in your profile), right? — mayer

joel rakich @ripper Rep: 257 4 1 · Answer 1 · 2017-09-19T17:45:39-07:00

joel rakich @ripper

Rep: 257

4

1

Gepost: 19 sep. 2017

Opties

Have you checked voltage on the battery? Maybe the new battery was junk and died already, especially if it was an ebay part. Use a multi meter on the outer pins of the battery connector. Report back what you find.

Was dit antwoord nuttig?

Ja Nee

Score 1

1 Opmerking:

Good point !

19 sep. 2017 door Minho

Voeg een opmerking toe