The door to the. Charging compartment
was pulled off the camera while removing the charging wire. No damage to door or camera. How can door be reattached to camera?
Is dit een goede vraag?
Rep: 101,2k
8
172
358
William Waddell, I do not own this camera but my guess is, you may have to disassemble the camera enough so you can insert the charge port cover back into position(into the retainer). See link below on how to disassemble to access inside camera to enable port cover back in place. Good luck. I hope this helped you out, if so let me know by pressing the helpful button.
Was dit antwoord nuttig?
Afgelopen 24 uren: 0
Afgelopen 7 dagen: 0
Afgelopen 30 dagen: 1
Altijd: 73
