OPGELOST: Motor runs way too fast but has no power, stops when in contact with b - Porter-Cable 382

Motor runs way too fast but has no power, stops when in contact with b

Motor winds up faster than normal but has no power. Stops as soon as it has any resistance. I can still hear the motor humming. Brushes seem to be free moving.

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee

Score 0

Gepost: 17 feb. 2017

Opties

@cajamadi ,Peter, Sounds like the center hub retaining bolt may of came loose or hub may have cracked/stripped not holding tight on shaft. Disassembly guide link below may help in diagnosing your issue with the sander. Good luck.

I hope this helped you out, if so let me know by pressing the helpful button.

Porter-Cable 382 Fan Replacement

Was dit antwoord nuttig?

Ja Nee

Score 2

Voeg een opmerking toe

Porter-Cable 382

Motor runs way too fast but has no power, stops when in contact with b

1 Antwoord

Voeg je antwoord toe