after replacing the battery, all lights flasing and no o.p.
after replacing the battery after long non use all the lights are flashing and and no output
Is dit een goede vraag?
Score
0
320683
1 Antwoord
Rep: 448
11
6
2
If the batteries have been replaced the UPS may need to charge them before it will respond correctly. Leave the UPS plugged in but off for 8 hours, then try again; before blaming a circuit board.
Was dit antwoord nuttig?
Score
0
kvpselvam all LED's flashing at the same time indicates an internal fault. Time to take it apart and check the circuit boards and capacitors.
door oldturkey03