Opties

Stator replacement on the FA50

Just picked up a new project the other day. I am going through it, getting ready to order the parts that it needs. My questions are as follows:

1. The stator cover is off, and this is where the stator is supposed to be. The coil was jb welded to the case, with a magnet sitting on this "flywheel". Is this something that can be undone, and the oem stator put back in?

2. There isn't an oil tank under the seat, so I don't know the diagram of where the hoses go to the pump.

If anyone can help out with these questions, I would be extremely appreciative.

Thanks.

[<iframe width="480" height="360" src="http://s132.photobucket.com/user/andypap...></iframe>|What is this?]

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 1

1 Opmerking:

Andy papczynski not sure what you are linking to. Attach whatever it is to your question. Use this guide Voeg afbeeldingen toe aan een bestaande vraag for that.

door

Voeg een opmerking toe