Repareer je spullen Gemeenschap Winkel

The Xbox 360 is the second game console made by Microsoft, and was released November 22, 2005.

428 Vragen Bekijk alle

Opties

The RROD X-Clamp fix did not work, why?

MY friends Xbox 360 had the dreaded RROD recently and since I fixed a few prior I figured no sweat, but unfortunately this one was not fixed. (Actually, my luck with fixing Xbox's is at a current 2-2. Two worked and two didn't.)

Im now left wondering why this time the Xbox didn't work. I used the "X-Clamp" fix where you replace the X-Clamps with 5mm machine screws and applied new thermal paste (even using the thermal paste remover and purifier.) I feel that im doing everything right, am I missing a step? I'd love some help or pointers!

Thanks in advance.

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste
Gekozen oplossing

Opties

Alexis Betancourt, if you followed the guide on here, as described, you should have success. If you do not have any luck with that, you may have solder joints that are to far open, and can not be bridge with the pressure of the X-clamps. A reflow may help you resolving those issues. Of course, none of those fixes are permanent, only a reball would be. Hope this helps, good luck.

Was dit antwoord nuttig?

Ja Nee
Score 1
Voeg een opmerking toe

Voeg je antwoord toe

Alexis Betancourt zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 3

Altijd: 7,270