Ga door naar hoofdinhoud
Help

Deze versie is geschreven door: AndreaBaglione

Tekst:

I too had the same problem I unplugged the cable with an incorrectly spudger metal contact even seen it sparks thought to have created a short circuit and then the surprise of the backlight is not working.
I was provided with light and restored to like new after I turned it ipad.
rekindled the light has begun to function. I highly recommend everyone to leave the download ipad before removing the digitizer.
Andrea
== Update ==
Now you can see if your monitor is functioning under a light?
- == Update ==
+== Update ==
- Hi fred,
+Hi fred,
The last possibility that remains is to do this test:
Put under a lamp and display at least the screen in a poor return ipad off from that state.
At the restart should be able to meet again the backlight.
If the problem persists, I suggest you take a look at this boat ebay, I read that you can repair the backlight of the chip with only $ 7! might be a good solution if the answers that I provided you can not come by chance.
http://www.ebay.com/itm/iPad-2-and-1-LCD-Led-Backlight-4R7-Coil-Repair-Part-OEM-USA-/110797457081
Hope that helps.
+Andrea
+
+ == Update ==
+
+ Sorry , is soldered! remove this and re- solder new 4R7 !!! ;)
+
+cheers
+
Andrea

Status:

open

Bewerkt door: AndreaBaglione

Tekst:

I too had the same problem I unplugged the cable with an incorrectly spudger metal contact even seen it sparks thought to have created a short circuit and then the surprise of the backlight is not working.
I was provided with light and restored to like new after I turned it ipad.
rekindled the light has begun to function. I highly recommend everyone to leave the download ipad before removing the digitizer.
Andrea
+== Update ==
+
+Now you can see if your monitor is functioning under a light?
+
== Update ==
- Now you can see if your monitor is functioning under a light?
+ Hi fred,
+
+The last possibility that remains is to do this test:
+
+Put under a lamp and display at least the screen in a poor return ipad off from that state.
+
+At the restart should be able to meet again the backlight.
+
+If the problem persists, I suggest you take a look at this boat ebay, I read that you can repair the backlight of the chip with only $ 7! might be a good solution if the answers that I provided you can not come by chance.
+
+http://www.ebay.com/itm/iPad-2-and-1-LCD-Led-Backlight-4R7-Coil-Repair-Part-OEM-USA-/110797457081
+
+Hope that helps.
+
+
+
+Andrea

Status:

open

Bewerkt door: AndreaBaglione

Tekst:

I too had the same problem I unplugged the cable with an incorrectly spudger metal contact even seen it sparks thought to have created a short circuit and then the surprise of the backlight is not working.
I was provided with light and restored to like new after I turned it ipad.
rekindled the light has begun to function. I highly recommend everyone to leave the download ipad before removing the digitizer.
Andrea
+
+ == Update ==
+
+ Now you can see if your monitor is functioning under a light?

Status:

open

Origineel bericht door: AndreaBaglione

Tekst:

I too had the same problem I unplugged the cable with an incorrectly spudger metal contact even seen it sparks thought to have created a short circuit and then the surprise of the backlight is not working.

I was provided with light and restored to like new after I turned it ipad.

rekindled the light has begun to function. I highly recommend everyone to leave the download ipad before removing the digitizer.

Andrea

Status:

open