Here’s a link to the [link|https://www.alisaler.com/hp-15-u483cl-quanta-y62p-y63p-day62pmb8e0-schematics/|schematics] (I hope relevant to your motherboard)
Here’s an image of the connector CN3 which shows the pinout of the power button board that may help (pins 2 & 6 for the power button). Check for voltage on +3V_RTC if temporarily shorting these two pins out doesn’t work.
The LID switch is used for the screen backlight power control (on/off when lid open/closed). It is also used for powering the PC off when the lid is closed dependent on the power option settings in the OS e.g. sleep etc but not if the OS is not loaded
[image|2602410]
(click on image to enlarge)
-
The [link|http://h10032.www1.hp.com/ctg/Manual/c04642245.pdf|maintenance and service guide] for a [link|https://support.hp.com/au-en/product/hp-envy-15-u300-x360-convertible-pc/7771362/model/8255118/manuals|15 -u363cl] model shows that the part number for the power button board is 774599-001. This guide is also applicable to a 15-u100cl so presumably it will be for yours.
+
The [link|http://h10032.www1.hp.com/ctg/Manual/c04642245.pdf|maintenance and service guide] for a [link|https://support.hp.com/au-en/product/hp-envy-15-u300-x360-convertible-pc/7771362/model/8255118/manuals|15 -u363cl] model shows that the part number for the power button board is 774599-001. This guide is also applicable to a 15-u100cl so presumably it will be for yours also.
Is there a HP part number shown anywhere on the original power button board to confirm what it is?
What is the ''product number'' of the laptop as shown on the information label on the bottom of the laptop?
I can’t find the service guide for your model using the HP support website above, and your model is also not listed [link|https://partsurfer.hp.com/partsurfer?searchtext=%20X360%2015-u363CL|here] when searching for HP parts. I suggest that you look for the product number instead of the model number using the link just mentioned, to see if it shows up that way.
Here’s a link to the [link|https://www.alisaler.com/hp-15-u483cl-quanta-y62p-y63p-day62pmb8e0-schematics/|schematics] (I hope relevant to your motherboard)
-
Here’s an image of the connector CN3 which shows the pinout of the power button board that may help (pins 2 & 6 for the power button). Check for +3V_RTC if temporarily shorting these two pins out doesn’t work.
+
Here’s an image of the connector CN3 which shows the pinout of the power button board that may help (pins 2 & 6 for the power button). Check for voltage on +3V_RTC if temporarily shorting these two pins out doesn’t work.
The LID switch is used for the screen backlight power control (on/off when lid open/closed). It is also used for powering the PC off when the lid is closed dependent on the power option settings in the OS e.g. sleep etc but not if the OS is not loaded
[image|2602410]
(click on image to enlarge)
The [link|http://h10032.www1.hp.com/ctg/Manual/c04642245.pdf|maintenance and service guide] for a [link|https://support.hp.com/au-en/product/hp-envy-15-u300-x360-convertible-pc/7771362/model/8255118/manuals|15 -u363cl] model shows that the part number for the power button board is 774599-001. This guide is also applicable to a 15-u100cl so presumably it will be for yours.
Is there a HP part number shown anywhere on the original power button board to confirm what it is?
What is the ''product number'' of the laptop as shown on the information label on the bottom of the laptop?
I can’t find the service guide for your model using the HP support website above, and your model is also not listed [link|https://partsurfer.hp.com/partsurfer?searchtext=%20X360%2015-u363CL|here] when searching for HP parts. I suggest that you look for the product number instead of the model number using the link just mentioned, to see if it shows up that way.
Here’s a link to the [link|https://www.alisaler.com/hp-15-u483cl-quanta-y62p-y63p-day62pmb8e0-schematics/|schematics] (I hope relevant to your motherboard)
Here’s an image of the connector CN3 which shows the pinout of the power button board that may help (pins 2 & 6 for the power button). Check for +3V_RTC if temporarily shorting these two pins out doesn’t work.
The LID switch is used for the screen backlight power control (on/off when lid open/closed). It is also used for powering the PC off when the lid is closed dependent on the power option settings in the OS e.g. sleep etc but not if the OS is not loaded
[image|2602410]
(click on image to enlarge)
-
The [link|http://h10032.www1.hp.com/ctg/Manual/c04642245.pdf|maintenance and service guide] for a [link|https://support.hp.com/au-en/product/hp-envy-15-u300-x360-convertible-pc/7771362/model/8255118/manuals|15 -u363cl] model shows that the part number for the power button board is 774599-001. This guide is also applicable to a 15-u100cl so presumably it will be for yours also as I can’t find the service guide for your model, using the HP support webpage.
+
The [link|http://h10032.www1.hp.com/ctg/Manual/c04642245.pdf|maintenance and service guide] for a [link|https://support.hp.com/au-en/product/hp-envy-15-u300-x360-convertible-pc/7771362/model/8255118/manuals|15 -u363cl] model shows that the part number for the power button board is 774599-001. This guide is also applicable to a 15-u100cl so presumably it will be for yours.
Is there a HP part number shown anywhere on the original power button board to confirm what it is?
-
What is the product number of the laptop as shown on the information label on the bottom of the laptop?
+
What is the ''product number'' of the laptop as shown on the information label on the bottom of the laptop?
-
Your model is also not listed [link|https://partsurfer.hp.com/partsurfer?searchtext=%20X360%2015-u363CL|here] when searching for HP parts. I suggest that you look for the product number instead of the model number when using this link
+
I can’t find the service guide for your model using the HP support website above, and your model is also not listed [link|https://partsurfer.hp.com/partsurfer?searchtext=%20X360%2015-u363CL|here] when searching for HP parts. I suggest that you look for the product number instead of the model number using the link just mentioned, to see if it shows up that way.
Here’s a link to the [link|https://www.alisaler.com/hp-15-u483cl-quanta-y62p-y63p-day62pmb8e0-schematics/|schematics] (I hope relevant to your motherboard)
Here’s an image of the connector CN3 which shows the pinout of the power button board that may help (pins 2 & 6 for the power button). Check for +3V_RTC if temporarily shorting these two pins out doesn’t work.
The LID switch is used for the screen backlight power control (on/off when lid open/closed). It is also used for powering the PC off when the lid is closed dependent on the power option settings in the OS e.g. sleep etc but not if the OS is not loaded
[image|2602410]
(click on image to enlarge)
-
I can’t find the service manual for your model, but the [link|http://h10032.www1.hp.com/ctg/Manual/c04642245.pdf|maintenance and service guide] for a [link|https://support.hp.com/au-en/product/hp-envy-15-u300-x360-convertible-pc/7771362/model/8255118/manuals|15 -u363cl] model shows that the part number for the power button board is 774599-001. This guide is also applicable to a 15-u100cl so presumably it will be for yours also.
+
The [link|http://h10032.www1.hp.com/ctg/Manual/c04642245.pdf|maintenance and service guide] for a [link|https://support.hp.com/au-en/product/hp-envy-15-u300-x360-convertible-pc/7771362/model/8255118/manuals|15 -u363cl] model shows that the part number for the power button board is 774599-001. This guide is also applicable to a 15-u100cl so presumably it will be for yours also as I can’t find the service guide for your model, using the HP support webpage.
Is there a HP part number shown anywhere on the original power button board to confirm what it is?
What is the product number of the laptop as shown on the information label on the bottom of the laptop?
Your model is also not listed [link|https://partsurfer.hp.com/partsurfer?searchtext=%20X360%2015-u363CL|here] when searching for HP parts. I suggest that you look for the product number instead of the model number when using this link
Here’s a link to the [link|https://www.alisaler.com/hp-15-u483cl-quanta-y62p-y63p-day62pmb8e0-schematics/|schematics] (I hope relevant to your motherboard)
Here’s an image of the connector CN3 which shows the pinout of the power button board that may help (pins 2 & 6 for the power button). Check for +3V_RTC if temporarily shorting these two pins out doesn’t work.
The LID switch is used for the screen backlight power control (on/off when lid open/closed). It is also used for powering the PC off when the lid is closed dependent on the power option settings in the OS e.g. sleep etc but not if the OS is not loaded
[image|2602410]
(click on image to enlarge)
I can’t find the service manual for your model, but the [link|http://h10032.www1.hp.com/ctg/Manual/c04642245.pdf|maintenance and service guide] for a [link|https://support.hp.com/au-en/product/hp-envy-15-u300-x360-convertible-pc/7771362/model/8255118/manuals|15 -u363cl] model shows that the part number for the power button board is 774599-001. This guide is also applicable to a 15-u100cl so presumably it will be for yours also.
-
Is there a HP part number shown anywhere on the original power board to confirm what it is?
+
Is there a HP part number shown anywhere on the original power button board to confirm what it is?
What is the product number of the laptop as shown on the information label on the bottom of the laptop?
Your model is also not listed [link|https://partsurfer.hp.com/partsurfer?searchtext=%20X360%2015-u363CL|here] when searching for HP parts. I suggest that you look for the product number instead of the model number when using this link
Here’s a link to the [link|https://www.alisaler.com/hp-15-u483cl-quanta-y62p-y63p-day62pmb8e0-schematics/|schematics] (I hope relevant to your motherboard)
Here’s an image of the connector CN3 which shows the pinout of the power button board that may help (pins 2 & 6 for the power button). Check for +3V_RTC if temporarily shorting these two pins out doesn’t work.
The LID switch is used for the screen backlight power control (on/off when lid open/closed). It is also used for powering the PC off when the lid is closed dependent on the power option settings in the OS e.g. sleep etc but not if the OS is not loaded
[image|2602410]
(click on image to enlarge)
+
I can’t find the service manual for your model, but the [link|http://h10032.www1.hp.com/ctg/Manual/c04642245.pdf|maintenance and service guide] for a [link|https://support.hp.com/au-en/product/hp-envy-15-u300-x360-convertible-pc/7771362/model/8255118/manuals|15 -u363cl] model shows that the part number for the power button board is 774599-001. This guide is also applicable to a 15-u100cl so presumably it will be for yours also.
-
-
I can’t find the service manual for your model, but the [link|http://h10032.www1.hp.com/ctg/Manual/c04642245.pdf|maintenance and service guide] for a [link|https://support.hp.com/au-en/product/hp-envy-15-u300-x360-convertible-pc/7771362/model/8255118/manuals|15 -u363cl] model shows that the part number for the power button board is 774599-001. This guide is also applicable to a 15-u100cl so presumably it will be for yours also.
+
Is there a HP part number shown anywhere on the original power board to confirm what it is?
What is the product number of the laptop as shown on the information label on the bottom of the laptop?
Your model is also not listed [link|https://partsurfer.hp.com/partsurfer?searchtext=%20X360%2015-u363CL|here] when searching for HP parts. I suggest that you look for the product number instead of the model number when using this link
Here’s a link to the [link|https://www.alisaler.com/hp-15-u483cl-quanta-y62p-y63p-day62pmb8e0-schematics/|schematics] (I hope relevant to your motherboard)
Here’s an image of the connector CN3 which shows the pinout of the power button board that may help (pins 2 & 6 for the power button). Check for +3V_RTC if temporarily shorting these two pins out doesn’t work.
The LID switch is used for the screen backlight power control (on/off when lid open/closed). It is also used for powering the PC off when the lid is closed dependent on the power option settings in the OS e.g. sleep etc but not if the OS is not loaded
[image|2602410]
(click on image to enlarge)
+
+
+
I can’t find the service manual for your model, but the [link|http://h10032.www1.hp.com/ctg/Manual/c04642245.pdf|maintenance and service guide] for a [link|https://support.hp.com/au-en/product/hp-envy-15-u300-x360-convertible-pc/7771362/model/8255118/manuals|15 -u363cl] model shows that the part number for the power button board is 774599-001. This guide is also applicable to a 15-u100cl so presumably it will be for yours also.
+
What is the product number of the laptop as shown on the information label on the bottom of the laptop?
-
I can’t find the service manual for your model, but the [link|http://h10032.www1.hp.com/ctg/Manual/c04642245.pdf|maintenance and service guide] for a [link|https://support.hp.com/au-en/product/hp-envy-15-u300-x360-convertible-pc/7771362/model/8255118/manuals|15 -u363cl] model shows that the part number for the power button board is 774599-001.
-
-
This guide is also applicable to a 15-u100cl so presumably it will be for yours also.
-
-
Also your model is not listed [link|https://partsurfer.hp.com/partsurfer?searchtext=%20X360%2015-u363CL|here] when searching for HP parts, that’s why I suggest looking for the product number instead of the model number when using this link
+
Your model is also not listed [link|https://partsurfer.hp.com/partsurfer?searchtext=%20X360%2015-u363CL|here] when searching for HP parts. I suggest that you look for the product number instead of the model number when using this link
Here’s a link to the [link|https://www.alisaler.com/hp-15-u483cl-quanta-y62p-y63p-day62pmb8e0-schematics/|schematics] (I hope relevant to your motherboard)
Here’s an image of the connector CN3 which shows the pinout of the power button board that may help (pins 2 & 6 for the power button). Check for +3V_RTC if temporarily shorting these two pins out doesn’t work.
-
The LID switch is used for the screen backlight power control (on/off when lid open/closed) and also powering the PC off when the lid is closed dependent on the power option settings in the OS e.g. sleep etc but not if the OS is not loaded
+
The LID switch is used for the screen backlight power control (on/off when lid open/closed). It is also used for powering the PC off when the lid is closed dependent on the power option settings in the OS e.g. sleep etc but not if the OS is not loaded
[image|2602410]
(click on image to enlarge)
What is the product number of the laptop as shown on the information label on the bottom of the laptop?
I can’t find the service manual for your model, but the [link|http://h10032.www1.hp.com/ctg/Manual/c04642245.pdf|maintenance and service guide] for a [link|https://support.hp.com/au-en/product/hp-envy-15-u300-x360-convertible-pc/7771362/model/8255118/manuals|15 -u363cl] model shows that the part number for the power button board is 774599-001.
This guide is also applicable to a 15-u100cl so presumably it will be for yours also.
Also your model is not listed [link|https://partsurfer.hp.com/partsurfer?searchtext=%20X360%2015-u363CL|here] when searching for HP parts, that’s why I suggest looking for the product number instead of the model number when using this link
Here’s a link to the [link|https://www.alisaler.com/hp-15-u483cl-quanta-y62p-y63p-day62pmb8e0-schematics/|schematics] (I hope relevant to your motherboard)
-
Here’s an image of the connector CN3 which shows the pinout of the power button board that may help (pins 2 & 6 for the power button). Check for +3V_RTC if shorting these two pins out doesn’t work.
+
Here’s an image of the connector CN3 which shows the pinout of the power button board that may help (pins 2 & 6 for the power button). Check for +3V_RTC if temporarily shorting these two pins out doesn’t work.
The LID switch is used for the screen backlight power control (on/off when lid open/closed) and also powering the PC off when the lid is closed dependent on the power option settings in the OS e.g. sleep etc but not if the OS is not loaded
[image|2602410]
(click on image to enlarge)
What is the product number of the laptop as shown on the information label on the bottom of the laptop?
-
I can’t find the service manual for your model, but the [http://h10032.www1.hp.com/ctg/Manual/c04642245.pdf|maintenance and service guide] for a [https://support.hp.com/au-en/product/hp-envy-15-u300-x360-convertible-pc/7771362/model/8255118/manuals|15 -u363cl] model shows that the part number for the power button board is 774599-001.
+
I can’t find the service manual for your model, but the [link|http://h10032.www1.hp.com/ctg/Manual/c04642245.pdf|maintenance and service guide] for a [link|https://support.hp.com/au-en/product/hp-envy-15-u300-x360-convertible-pc/7771362/model/8255118/manuals|15 -u363cl] model shows that the part number for the power button board is 774599-001.
This guide is also applicable to a 15-u100cl so presumably it will be for yours also.
Also your model is not listed [link|https://partsurfer.hp.com/partsurfer?searchtext=%20X360%2015-u363CL|here] when searching for HP parts, that’s why I suggest looking for the product number instead of the model number when using this link
Here’s a link to the [link|https://www.alisaler.com/hp-15-u483cl-quanta-y62p-y63p-day62pmb8e0-schematics/|schematics] (I hope relevant to your motherboard)
Here’s an image of the connector CN3 which shows the pinout of the power button board that may help (pins 2 & 6 for the power button). Check for +3V_RTC if shorting these two pins out doesn’t work.
The LID switch is used for the screen backlight power control (on/off when lid open/closed) and also powering the PC off when the lid is closed dependent on the power option settings in the OS e.g. sleep etc but not if the OS is not loaded
[image|2602410]
(click on image to enlarge)
What is the product number of the laptop as shown on the information label on the bottom of the laptop?
-
I can’t find the service manual for your model, but the http://h10032.www1.hp.com/ctg/Manual/c04642245.pdf|maintenance and service guide] for a 15 -u363cl model shows that the part number for the power button board is 774599-001.
+
I can’t find the service manual for your model, but the [http://h10032.www1.hp.com/ctg/Manual/c04642245.pdf|maintenance and service guide] for a [https://support.hp.com/au-en/product/hp-envy-15-u300-x360-convertible-pc/7771362/model/8255118/manuals|15 -u363cl] model shows that the part number for the power button board is 774599-001.
This guide is also applicable to a 15-u100cl so presumably it will be for yours also.
-
Also your model is not listed [https://partsurfer.hp.com/partsurfer?searchtext=%20X360%2015-u363CL|here] when searching for HP parts, that’s why I suggest looking for the product number instead of the model number when using this link
+
Also your model is not listed [link|https://partsurfer.hp.com/partsurfer?searchtext=%20X360%2015-u363CL|here] when searching for HP parts, that’s why I suggest looking for the product number instead of the model number when using this link
Here’s a link to the [link|https://www.alisaler.com/hp-15-u483cl-quanta-y62p-y63p-day62pmb8e0-schematics/|schematics] (I hope relevant to your motherboard)
Here’s an image of the connector CN3 which shows the pinout of the power button board that may help (pins 2 & 6 for the power button). Check for +3V_RTC if shorting these two pins out doesn’t work.
The LID switch is used for the screen backlight power control (on/off when lid open/closed) and also powering the PC off when the lid is closed dependent on the power option settings in the OS e.g. sleep etc but not if the OS is not loaded
[image|2602410]
(click on image to enlarge)
+
+
What is the product number of the laptop as shown on the information label on the bottom of the laptop?
+
+
I can’t find the service manual for your model, but the http://h10032.www1.hp.com/ctg/Manual/c04642245.pdf|maintenance and service guide] for a 15 -u363cl model shows that the part number for the power button board is 774599-001.
+
+
This guide is also applicable to a 15-u100cl so presumably it will be for yours also.
+
+
Also your model is not listed [https://partsurfer.hp.com/partsurfer?searchtext=%20X360%2015-u363CL|here] when searching for HP parts, that’s why I suggest looking for the product number instead of the model number when using this link
Here’s a link to the [link|https://www.alisaler.com/hp-15-u483cl-quanta-y62p-y63p-day62pmb8e0-schematics/|schematics] (I hope relevant to your motherboard)
Here’s an image of the connector CN3 which shows the pinout of the power button board that may help (pins 2 & 6 for the power button). Check for +3V_RTC if shorting these two pins out doesn’t work.
-
The LID switch is used for the backlight control (on/off lid open/closed) and also powering the device off when the lid is closed dependent on the power option settings in the OS e.g. sleep etc but not if the OS is not loaded
+
The LID switch is used for the screen backlight power control (on/off when lid open/closed) and also powering the PC off when the lid is closed dependent on the power option settings in the OS e.g. sleep etc but not if the OS is not loaded
Here’s a link to the [link|https://www.alisaler.com/hp-15-u483cl-quanta-y62p-y63p-day62pmb8e0-schematics/|schematics] (I hope relevant to your motherboard)
Here’s an image of the connector CN3 which shows the pinout of the power button board that may help (pins 2 & 6 for the power button). Check for +3V_RTC if shorting these two pins out doesn’t work.
+
+
The LID switch is used for the backlight control (on/off lid open/closed) and also powering the device off when the lid is closed dependent on the power option settings in the OS e.g. sleep etc but not if the OS is not loaded
Here’s a link to the [link|https://www.alisaler.com/hp-15-u483cl-quanta-y62p-y63p-day62pmb8e0-schematics/|schematics] (I hope relevant to your motherboard)
-
Here’s an image of the connector CN3 which shows the pinout of the power button board that may help (pins 2 & 6 for the power button). Check for +3V_RTC if shorting these two pins out doesn’t work.
+
Here’s an image of the connector CN3 which shows the pinout of the power button board that may help (pins 2 & 6 for the power button). Check for +3V_RTC if shorting these two pins out doesn’t work.
Here’s a link to the [link|https://www.alisaler.com/hp-15-u483cl-quanta-y62p-y63p-day62pmb8e0-schematics/|schematics] (I hope relevant to your motherboard)
-
Here’s an image of the connector CN3 which shows the pinout ( pins 2 & 6 for the power button) of the power button board that may help. Check for +3V_RTC if shorting these two pins out doesn’t work.
+
Here’s an image of the connector CN3 which shows the pinout of the power button board that may help ( pins 2 & 6 for the power button). Check for +3V_RTC if shorting these two pins out doesn’t work.
Here’s a link to the [link|https://www.alisaler.com/hp-15-u483cl-quanta-y62p-y63p-day62pmb8e0-schematics/|schematics] (I hope relevant to your motherboard)
-
Here’s an image of the connector CN3 which shows the pinout ( pins 2 & 6 for the power button) of the power button board that may help. Check for +3V_RTC if shorting it out doesn’t work.
+
Here’s an image of the connector CN3 which shows the pinout ( pins 2 & 6 for the power button) of the power button board that may help. Check for +3V_RTC if shorting these two pins out doesn’t work.
Here’s a link to the [link|https://www.alisaler.com/hp-15-u483cl-quanta-y62p-y63p-day62pmb8e0-schematics/|schematics] (I hope relevant to your motherboard)
-
Here’s an image of the connector CN3 which shows the pinout ( pins 2 & 6 for the power button) of the power button board that may help.
+
Here’s an image of the connector CN3 which shows the pinout ( pins 2 & 6 for the power button) of the power button board that may help. Check for +3V_RTC if shorting it out doesn’t work.
Here’s a link to the [link|https://www.alisaler.com/hp-15-u483cl-quanta-y62p-y63p-day62pmb8e0-schematics/|schematics] (I hope relevant to your motherboard)
-
Here’s an image of the connector CN3 which shows the pinout of the power button board that may help.
+
Here’s an image of the connector CN3 which shows the pinout ( pins 2 & 6 for the power button) of the power button board that may help.
Here’s a link to the [https://www.alisaler.com/hp-15-u483cl-quanta-y62p-y63p-day62pmb8e0-schematics/|schematics] (I hope relevant to your motherboard)
+
Here’s a link to the [link|https://www.alisaler.com/hp-15-u483cl-quanta-y62p-y63p-day62pmb8e0-schematics/|schematics] (I hope relevant to your motherboard)
-
Here’s an image of the pinout connections CN3 of the power button board that may help.
+
Here’s an image of the connector CN3 which shows the pinout of the power button board that may help.
Hi @wiley1 ,
Here’s a link to the [https://www.alisaler.com/hp-15-u483cl-quanta-y62p-y63p-day62pmb8e0-schematics/|schematics] (I hope relevant to your motherboard)
Here’s an image of the pinout connections CN3 of the power button board that may help.
[image|2602410]
(click on image to enlarge)