Deze versie is geschreven door: Harry Watson

Titel:

Canon EOS60D USB Interface Board Replacement.

Tekst:

My Canon EOS60D was on a tripod with USB cable in place.  Tripod was knocked over and camera landed on the Port side, meaning that the USB plug hit the floor first.  Since then the USB connection has not worked although all other camera functions are fine including HDMI interface and remote trigger.

Is it possible to replace the USB interface board and if so, how?  I’ve looked at your guides and none go as far as accessing the USB board.

Thanks in advance

Harry Watson

Toestel:

Canon EOS 60D

Status:

open

Goedgekeurd antwoord:

Origineel bericht door: Harry Watson

Titel:

Canon EOS60D USB Interface Board Replacement.

Tekst:

My Canon EOS60D was on a tripod with USB cable in place.  Tripod was knocked over and camera landed on the Port side, meaning that the USB plug hit the floor first.  Since then the USB connection has not worked although all other camera functions are fine including HDMI interface and remote trigger.

Is it possible to replace the USB interface board and if so, how?  I’ve looked at your guides and none go as far as accessing the USB board.

Thanks in advance

Harry Watson

Toestel:

Canon EOS 60D

Status:

open