25 aug. 2018
Deze versie is geschreven door:
mayer
Tekst:
Take the back off and examine the capacitors for swelling and/or leakage. Next step would be to go over the video board with a soldering iron looking for “cold solders”. You can get a very good electrical jolt from the CRT so look up how to discharge it. + + Nevermind, here is a video on how to do it: + + https://www.youtube.com/watch?v=snkMLQskFi4
Status:
open
25 aug. 2018
Bewerkt door:
mayer
Tekst:
Take the back off and examine the capacitors for swelling and/or leakage. Next step would be to go over the video board with a soldering iron looking for “cold solders”. + + You can get a very good electrical jolt from the CRT so look up how to discharge it.
Status:
open
25 aug. 2018
Origineel bericht door:
mayer
Tekst:
Take the back off and examine the capacitors for swelling and/or leakage.
Next step would be to go over the video board with a soldering iron looking for “cold solders”.
Status:
open