There is no LED on the SATA cable its self. Here an image of the cable:
[image|1445059]
The topmost connector is for the drive (SATA) the smaller leg to the left is the lid sensor (Hall Effect transistor) and the other end connects to the logic board. Here's the IFIXIT guide: [guide|10379] and here is the needed part: [product|IF163-041-2]
-
Are you sure you got the correct part? Are you sure this is the correct system?
There is no LED on the SATA cable its self. Here an image of the cable:
[image|1445059]
-
The top most connecter is for the drive (SATA) the smaller leg to the left is the lid sensor (Hall Effect transistor) and the other end connects to the logic board. Here's the IFIXIT guide: [guide|10379] and here is the needed part: [product|IF163-041-2]
+
The topmost connector is for the drive (SATA) the smaller leg to the left is the lid sensor (Hall Effect transistor) and the other end connects to the logic board. Here's the IFIXIT guide: [guide|10379] and here is the needed part: [product|IF163-041-2]
Are you sure you got the correct part? Are you sure this is the correct system?
There is no LED on the SATA cable its self. Here an image of the cable:
[image|1445059]
The top most connecter is for the drive (SATA) the smaller leg to the left is the lid sensor (Hall Effect transistor) and the other end connects to the logic board. Here's the IFIXIT guide: [guide|10379] and here is the needed part: [product|IF163-041-2]
Are you sure you got the correct part? Are you sure this is the correct system?