The A1395 is an iPad 2 WiFi. As a first step, take a look at the connections for the LCD, Digitizer and Battery. [guide|11970|Follow this guide] very carefully.
If you do something wrong, you could damage or break the digitizer or LCD. If you do something really bad, you could damage the logic board.
Unlike an iPhone, properly re-assembling an iPad requires good quality adhesive to secure the digitizer to the frame. Replacement digitizers have adhesive pre-mounted but it usually doesn't hold very well. While this can be a DIY repair, there are more traps you can get caught in. For example, marks and smudges on the LCD, dust trapped inside, pinching flexes, lifting digitizers etc. I damaged a few LCD's when I first started and those can be very expensive.
So open it if you like, take a look to see if you find some obvious problem but remember that putting it back together is harder than opening it.
If your uncomfortable, find a shop that does high quality work as opposed to low prices.