Screen backlight working but no picture after digitizer replacement
Tekst:
I've replaced a cracked screen, all following the instructions perfectly.
However, when I've put it back together, it boots, back light turns on, but no image is on the screen - no apple logo or anything.
Once on, I can lock and unlock with the power button, and the home button works.
Any suggestions?
It doesn't seem to be the same problem as here: "Th screen stays black after a digitizer replacement"... because it's actually 'lighting up'.
I've done the usual hard reset with no luck
Screen backlight working but no picture after digitizer replacement
Tekst:
I've replaced a cracked screen, all following the instructions perfectly.
However, when I've put it back together, it boots, back light turns on, but no image is on the screen - no apple logo or anything.
Once on, I can lock and unlock with the power button, and the home button works.
Any suggestions?
It doesn't seem to be the same problem as here: "Th screen stays black after a digitizer replacement"... because it's actually 'lighting up'.
I've done the usual hard reset with no luck
Screen backlight working but no picture after digitizer replacement
Tekst:
I've replaced a cracked screen, all following the instructions perfectly.
However, when I've put it back together, it boots, back light turns on, but no image is on the screen - no apple logo or anything.
Once on, I can lock and unlock with the power button, and the home button works.
Any suggestions?
It doesn't seem to be the same problem as here: "Th screen stays black after a digitizer replacement"... because it's actually 'lighting up'.
I've done the usual hard reset with no luck