Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Help

Origineel bericht door: Wim de Groot ,

Tekst:

Probably too late this hint, but nevertheless...

You could do this, it works for years now on my book:

Take of the shields (very easy) with one of these handy Chinese sets or you could use an ordinary instrument screwdriver that fits.

Take a mini-powertool like a Dremel or sort-like,

grind away a thin layer of te steel that's holding the pin, preverable at several sides of its curved surface

Grinding away half of the thickness will reduce its strenght 50%, do tests on the way, the book should stay open, even when it is almost closed!!

I used a vacumecleaner to avoid particals too get in, while grinding.

Works SUPER!!

Good luck!

/Volumes/Untitled/DCIM/100NIKON/DSCN1563.JPG

/Volumes/Untitled/DCIM/100NIKON/DSCN1560.JPG

Status:

open