Jack Cracker is correct however you do not need to used the hacked firmware if you don't want to. You can use the stock firmware from the good drive and just spoof it as the dead drive revision with the dead drive's key.
To do this you would also need to read the working drive to get the stock firmware.
-
For example.
+
For example. (very much dumbed down! read the PDF previously mentioned by Jack)
If you had a dead Samsung and a working Benq.
-Read both drives and save the original firmwares.
-In jungle flasher firmware tab use the Benq stock firmware as the target and the samsung stock firmware as the source (you will understand once you explore Jungleflasher a bit)
-Make sure you spoof source to target. The should essentially flash the benq with the Samsung key and spoof it as a samsung so the xbox thinks it's the same drive.
Jack Cracker is correct however you do not need to used the hacked firmware if you don't want to. You can use the stock firmware from the good drive and just spoof it as the dead drive revision with the dead drive's key.
To do this you would also need to read the working drive to get the stock firmware.
For example.
If you had a dead Samsung and a working Benq.
-Read both drives and save the original firmwares.
-
-Flash the Benq using it's own stock firmware as the target and the samsung stock as the source (you will understand once you explore Jungleflasher a bit)
+
-In jungle flasher firmware tab use the Benq stock firmware as the target and the samsung stock firmware as the source (you will understand once you explore Jungleflasher a bit)
-Make sure you spoof source to target. The should essentially flash the benq with the Samsung key and spoof it as a samsung so the xbox thinks it's the same drive.
Jack Cracker is correct however you do not need to used the hacked firmware if you don't want to. You can use the stock firmware from the good drive and just spoof it as the dead drive revision with the dead drive's key.
To do this you would also need to read the working drive to get the stock firmware.
For example.
If you had a dead Samsung and a working Benq.
-Read both drives and save the original firmwares.
-
-Flash the Benq with the Samsung key and spoof it as a samsung so the xbox thinks it's the same drive.
+
-Flash the Benq using it's own stock firmware as the target and the samsung stock as the source (you will understand once you explore Jungleflasher a bit)
+
+
-Make sure you spoof source to target. The should essentially flash the benq with the Samsung key and spoof it as a samsung so the xbox thinks it's the same drive.
Jack Cracker is correct however you do not need to used the hacked firmware if you don't want to. You can use the stock firmware from the good drive and just spoof it as the dead drive revision with the dead drive's key.
To do this you would also need to read the working drive to get the stock firmware.
For example.
If you had a dead Samsung and a working Benq.
-Read both drives and save the original firmwares.
-Flash the Benq with the Samsung key and spoof it as a samsung so the xbox thinks it's the same drive.
Should be good.