Deze versie is geschreven door:
Josh
Tekst:
| | Have you made sure the connector is seated properly? Or have you tried another screen to be certain it is the digitizer and not the board connector? |
|---|
| + | == Update == |
|---|
| + | |
|---|
| + | With looking at the picture, yes you would need to desolder the connector and solder a new one on. Sorry for the bad news. |
|---|
| + | |
|---|
| + | |
|---|
| + | |
|---|
| + | IF you would like to compare check out this |
|---|
| + | |
|---|
| + | |
|---|
| + | |
|---|
| + | [http://d3nevzfk7ii3be.cloudfront.net/igi/BGgDnXKAqRemrFeM.huge|iPad Mini Wi-Fi Digitizer Connector] |
|---|
| + | |
|---|
| + | |
|---|
| + | |
|---|
| + | You will see no gap in the gold prongs. |
|---|
Status:
open
Origineel bericht door:
Josh
Tekst:
Have you made sure the connector is seated properly? Or have you tried another screen to be certain it is the digitizer and not the board connector?
Status:
open