Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Help

Deze versie is geschreven door: Walter Galan ,

Tekst:

Hi Amit,
 
I went through the complete post but i am not satisfied with both the answers because of that it is difficult for a common user they can't open the HDD and change the plotter or PCB. If you still suffering the same situation then please don't hit & try on the HDD else you might lose data permanently. Please consult any [http://www.stellarinfo.co.in/services/data-recovery-services.php|Data Recovery Expert]Data Recovery Expert they will guide you step by step or try any free Data Recovery Softwarestep.
I went through the complete post but i am not satisfied with both the answers because of that it is difficult for a common user they can't open the HDD and change the plotter or PCB. If you still suffering the same situation then please don't hit & try on the HDD else you might lose data permanently. Please consult any [http://www.stellarinfo.co.in/services/data-recovery-services.php|Data Recovery Expert]Data Recovery Expert they will guide you step by step or try any free Data Recovery Softwarestep.

Status:

open

Origineel bericht door: reha ,

Tekst:

Hi Amit,

I went through the complete post but i am not satisfied with both the answers because of that it is difficult for a  common user they can't open the HDD and change the plotter or PCB. If you still suffering the same situation then please don't hit & try on the HDD else you might lose data permanently. Please consult any [http://www.stellarinfo.co.in/services/data-recovery-services.php|Data Recovery Expert] they will guide you step by step or try any free Data Recovery Software.

Status:

open