Ga door naar hoofdinhoud

MacBook Pro (15 Zoll, Anfang 2011, Unibody) Austausch des Logic Boards

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 21 handleidingen die deze stap bevatten.

Stap 3
MacBook Pro 15" Unibody Early 2011 Logic Board Replacement: stap 0, afbeelding 1 van 1
  • Pull the camera cable out of its socket on the logic board.

  • Don't lift upward on the camera cable as you disconnect it. Pulling upward on the cable may damage both the cable and the logic board. Pull the cable parallel to the face of the logic board.

Ziehe das Kamerakabel aus seinem Sockel auf dem Logic Board.

Hebe das Kabel dabei nicht senkrecht hoch. Wenn du das tust kannst du Kabel und Logic Board beschädigen. Ziehe das Kabel parallel zur Oberfläche des Logic Boards heraus.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.