Audio-Technica ATH-M40x Left Driver Replacement

Engels

Nederlands

Stap 3 vertalen

Stap 3

Desolder the two connections labeled L+ and LG to disconnect the left driver from the headphones.
Be careful when using the soldering iron as it is extremely hot and can burn you. Use safety gloves if possible and helping hands to hold the circuit board. Alternatively, tape the board to a solder-safe surface to make the process easier.
Although this guide demonstrates how to replace the left driver, the right speaker wires are soldered onto this board also. When replacing the right driver, desolder the connectors labeled RG and R+.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.