Ga door naar hoofdinhoud

Audio-Technica ATH-M40x Left Driver Replacement

Engels
Nederlands
Stap 2
Audio-Technica ATH-M40x Left Driver Replacement: stap 0, afbeelding 1 van 3 Audio-Technica ATH-M40x Left Driver Replacement: stap 0, afbeelding 2 van 3 Audio-Technica ATH-M40x Left Driver Replacement: stap 0, afbeelding 3 van 3
  • Use a spudger to pry the driver from the headphones but don't pull it or yank it off as it is connected by wire cables and could rip those out.

  • Use a Phillips #0 screwdriver to remove the four 2 mm screws from the small circuit board in the housing.

  • You will be able to desolder the driver wires more easily once the board is removed.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.