Microsoft Surface Laptop 3 15" LCD Panel Replacement

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Engels

Nederlands

Stap 7 vertalen

Stap 7

Soften the left edge adhesive

The adhesive securing the screen to the back cover is very strong and requires a lot of heat before you can create an initial gap.
Note the location of the adhesive we're softening on this step: long strips secure each short edge of the screen.
Apply a heated iOpener to the left edge of the screen for three minutes.
Alternatively, use a heat gun or hair dryer to soften the adhesive. If you're reusing your screen, be careful not to overheat it. Heat it enough so you can barely touch it comfortably.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.