Ga door naar hoofdinhoud

Samsung Galaxy S22 Plus Back Cover Replacement

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 4 handleidingen die deze stap bevatten.

Stap 2
Samsung Galaxy S22 Plus Back Cover Replacement, Insert an opening pick: stap 0, afbeelding 1 van 3 Samsung Galaxy S22 Plus Back Cover Replacement, Insert an opening pick: stap 0, afbeelding 2 van 3 Samsung Galaxy S22 Plus Back Cover Replacement, Insert an opening pick: stap 0, afbeelding 3 van 3
Insert an opening pick
  • Secure a suction handle to the bottom edge of the back cover, as close to the edge as possible.

  • If the back cover is cracked, the suction handle may not stick. Try lifting it with strong tape, or superglue the suction handle in place and allow it to dry so you can proceed.

  • Lift the back cover with the suction handle to create a small gap between the back cover and the frame.

  • If you have trouble creating a gap, apply more heat to further soften the adhesive. Follow the iOpener instructions to avoid overheating.

  • Insert an opening pick into the gap you created.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.