Ga door naar hoofdinhoud

屏幕移除

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 12 handleidingen die deze stap bevatten.

Stap 6
Screen Removal, Loosen the display adhesive: stap 0, afbeelding 1 van 1
Loosen the display adhesive
  • Apply a heated iOpener to the screen to loosen the adhesive underneath. Apply the iOpener for at least 3 minutes.

  • A hair dryer, heat gun, or hot plate may also be used, but be careful not to overheat the device. The edge should feel slightly too hot to the touch.

加热过的iOpener 放在屏幕上,使下面的粘合剂松动。使用 iOpener 至少 3 分钟。

也可以使用吹风机、热风枪或热板,但要注意不要使设备过热。边缘的触感应略微过热。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.