Ga door naar hoofdinhoud

여는 절차

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 19 handleidingen die deze stap bevatten.

Stap 9
Opening Procedure: stap 0, afbeelding 1 van 1
  • Reheat your iOpener and apply it to the left edge of the Surface's screen for two minutes.

  • You may need to reheat and reapply the iOpener several times to get the tablet warm enough. Follow the iOpener instructions to avoid overheating.

  • You may also use a hair dryer, heat gun, or hot plate to heat the Surface.

  • Be careful not to overheat the Surface—the screen and internal battery are susceptible to heat damage.

  • Don't use a hot plate if the screen has been taped.

iOpener를 다시 가열하고 Surface 스크린 왼편 가장자리에 2분 동안 적용하세요.

태블릿을 충분히 따뜻하게 하려면 iOpener를 여러 번 재가열하고 다시 적용해야 할 수 있습니다. 과열을 방지하려면 iOpener 지침을 따르세요.

헤어 드라이어, 열선 총 또는 핫 플레이트를 사용하여 Surface를 가열할 수도 있습니다.

Surface를 과열하지 않도록 주의하세요—스크린과 내부 배터리는 열 손상에 취약합니다.

스크린에 테이프가 붙어있는 경우 핫 플레이트는 사용하지 마세요.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.