Ga door naar hoofdinhoud

開口方法

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 19 handleidingen die deze stap bevatten.

Stap 7
Opening Procedure: stap 0, afbeelding 1 van 1
  • Reheat your iOpener and apply it to the bottom edge of the Surface's screen for two minutes.

  • You may also use a hair dryer, heat gun, or hot plate to heat the Surface.

  • Be careful not to overheat the Surface—the screen and internal battery are susceptible to heat damage.

  • Don't use a hot plate if the screen has been taped.

iOpenerを再度温めて、Surfaceスクリーンの下端に2分間当てます。

また、ヘアドライヤー、ヒートガン、ホットプレートなどを使ってSurfaceを加熱することもできます。

スクリーンや内蔵バッテリーは熱で損傷しやすいので、Surfaceを加熱しすぎないように注意してください。

スクリーンにテープが貼られている場合は、ホットプレートを使用しないでください。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.