Ga door naar hoofdinhoud

開口方法

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 19 handleidingen die deze stap bevatten.

Stap 6
Opening Procedure, Cut through the screen adhesive: stap 0, afbeelding 1 van 2 Opening Procedure, Cut through the screen adhesive: stap 0, afbeelding 2 van 2
Cut through the screen adhesive
  • Slide the pick down the right edge of the Surface to slice through the adhesive under the screen.

  • Throughout the rest of the procedure, if you encounter significant resistance while sliding the pick, stop and reheat the section you're working on. Applying too much pressure with the pick can crack the glass.

  • Leave this opening pick in the right edge to prevent the adhesive from resealing.

ピックをSurfaceの右端にスライドさせて、スクリーンの下の接着剤を切開します。

作業中、開口ピックをスライド中に大きな抵抗を感じたら、すぐに作業を中断して、作業中のエリアを再度温めてください。開口ピックに力を入れすぎると、ガラスに亀裂が入ってしまうことがあります。

この開口ピックをデバイス右端に残しておきます。接着剤の再装着を防ぐことができます。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.