Repareer je spullen Gemeenschap Winkel

Xiaomi Redmi Note 7 Screen and Metal case Replacement

Terug naar de handleiding
Engels
Nederlands
Stap 12
Xiaomi Redmi Note 7 Screen and Metal case Replacement, (Re)Place the Battery: stap 0, afbeelding 1 van 3 Xiaomi Redmi Note 7 Screen and Metal case Replacement, (Re)Place the Battery: stap 0, afbeelding 2 van 3 Xiaomi Redmi Note 7 Screen and Metal case Replacement, (Re)Place the Battery: stap 0, afbeelding 3 van 3
(Re)Place the Battery

  • Depending on the part you buy also the highlighted plastic piece may be not present so you have to take it from the old phone. This piece is crucial, it helds in place the volume and power buttons. To place it simply insert the button (if them have fallen off) and place it in the only direction possible

  • Peel of the adhesive film and place the battery as in picture

  • Then connect the battery ribbon cable with the Screen and Power ribbon cables back in place

  • Then you have to mount back the protective metal shells both on the left and right connectors as shown in the last picture

  • At this time you can use a new battery for the phone

  • If you damaged your battery during removal (not shown in this guide) please throw it away and use a new one, this could be very incautious

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.