Xiaomi Redmi Note 7 Screen and Metal case Replacement

Terug naar de handleiding

Engels

Nederlands

Vorige stap Volgende stap

Stap 11 vertalen

Stap 11

Xiaomi Redmi Note 7 Screen and Metal case Replacement, Secure back the bottom electronics: stap 0, afbeelding 1 van 3

Xiaomi Redmi Note 7 Screen and Metal case Replacement, Secure back the bottom electronics: stap 0, afbeelding 2 van 3

Xiaomi Redmi Note 7 Screen and Metal case Replacement, Secure back the bottom electronics: stap 0, afbeelding 3 van 3

Secure back the bottom electronics

Before placing back the board you may want to remove a plastic film that protects new glue for the components
Put the board back in place until it sits firmly standing in the groove, the glue should also keep that in place
connect back the ribbon cable
place the speaker back and secure it with the eight screws as in step seven.
As you can see from the picture if there are cables or films that are in the way while you assemble your phone, you can use tape to help you out

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.