Xiaomi Redmi Note 7 Screen and Metal case Replacement

Terug naar de handleiding

Engels

Nederlands

Vorige stap Volgende stap

Stap 10 vertalen

Stap 10

Xiaomi Redmi Note 7 Screen and Metal case Replacement, Secure the top electronics: stap 0, afbeelding 1 van 3

Xiaomi Redmi Note 7 Screen and Metal case Replacement, Secure the top electronics: stap 0, afbeelding 2 van 3

Xiaomi Redmi Note 7 Screen and Metal case Replacement, Secure the top electronics: stap 0, afbeelding 3 van 3

Secure the top electronics

Now attach back the fingerprint sensor cable connector to its housing
Then insert back the plastic shell on top of the circuitry until you find that it falls in the groove
now you can screw back in place the seven screws as highlighted
then plug back the antenna cable
Depending on what parts you buy, you may want to take the antenna cable from the old phone

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.