Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 13 handleidingen die deze stap bevatten.
Stap 1 vertalen
Stap 1
Heat the screen
-
If the screen's glass is cracked, keep further breakage contained and prevent bodily harm during your repair by taping over the glass. Lay overlapping strips of clear packing tape over the display until all the glass is covered. Wear safety glasses to protect your eyes.
-
Heat an iOpener and apply it to the right edge of the Surface's screen for two minutes.
| [title] Heat the screen | |
| [* icon_caution] Completely power off the Surface before you begin disassembly. | |
| - | [* black] If the screen's glass is cracked, keep further breakage contained and prevent bodily harm during your repair by taping over the glass. Wear safety glasses to protect your eyes. |
| + | [* black] If the screen's glass is cracked, keep further breakage contained and prevent bodily harm during your repair by [link|https://guide-images.cdn.ifixit.com/igi/Le4oJrfKZTw3DD6y.full|taping over the glass|new_window=true]. Lay overlapping strips of clear packing tape over the display until all the glass is covered. Wear safety glasses to protect your eyes. |
| [* black] [guide|25705|Heat an iOpener|new_window=true] and apply it to the right edge of the Surface's screen for two minutes. | |
| [* icon_note] You may need to reheat and reapply the iOpener several times to get the Surface warm enough. Follow the iOpener instructions to avoid overheating. | |
| [* icon_caution] A hair dryer, heat gun, or hot plate may also be used for more heat, but be careful not to overheat the Surface—the screen and internal battery are susceptible to heat damage. |
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.