Repareer je spullen Gemeenschap Winkel

Microsoft Surface Pro 6 Opening Procedure

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 13 handleidingen die deze stap bevatten.

Terug naar de handleiding
Engels
Koreaans
Stap 2
Microsoft Surface Pro 6 Opening Procedure, Take note of the adhesive layout: stap 0, afbeelding 1 van 2 Microsoft Surface Pro 6 Opening Procedure, Take note of the adhesive layout: stap 0, afbeelding 2 van 2
Take note of the adhesive layout

  • Take note of the screen adhesive layout before continuing:

  • These areas only contain adhesive and are safe to cut.

  • The display board and flex cables sit here close to the edge. Cut very carefully and do not insert the pick as deep under the display.

  • Fragile antenna cables lie under this part of the screen. Carefully follow the procedure to avoid damaging them. The adhesive is also the thickest here.

접착제 배치 형식을 기억하기

계속하기 전에 스크린 접착제 배치 형식을 기억하세요.

이 부분에는 접착제만 있어서 잘라도 무방합니다.

디스플레이 보드와 플렉스 케이블은 가장자리에 가깝게 있습니다. 접착제를 매우 조심히 자르고 픽은 디스플레이 밑으로 깊숙이 끼우지 마세요.

손상하기 쉬운 안테나 케이블은 스크린 이 부분 밑에 있습니다. 손상하지 않도록 절차를 조심히 따르세요. 접착제도 이곳이 가장 두껍습니다.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.