Ga door naar hoofdinhoud

iPhone 12 mini 여는 절차

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 8 handleidingen die deze stap bevatten.

Stap 7
iPhone 12 mini Opening Procedure, Lift the screen slightly: stap 0, afbeelding 1 van 3 iPhone 12 mini Opening Procedure, Lift the screen slightly: stap 0, afbeelding 2 van 3 iPhone 12 mini Opening Procedure, Lift the screen slightly: stap 0, afbeelding 3 van 3
Lift the screen slightly
  • Pull up on the suction cup with firm, constant pressure to create a slight gap between the screen and the metal frame.

  • A plastic bezel is secured to the underside of the display, and needs to lift up with the display. Inserting a pick between the bezel and the display will damage the panel.

  • Insert an opening pick into the gap under the screen's plastic bezel.

  • Make sure the opening pick is placed under the plastic bezel (against the frame) to avoid damaging your screen.

  • The watertight adhesive holding the screen in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your tool.

흡입 컵을 확실하고 일정한 압력으로 위로 당겨 스크린과 프레임 사이에 약간의 틈을 만드세요.

스크린의 플라스틱 베젤 아랫면 틈에 opening pick/여는 픽을끼우세요.

스크린을 제자리에 고정하는 방수 접착제는 매우 강합니다; 이 초기 틈을 만들려면 상당한 힘이 필요합니다. 틈을 여는데 어려움이 있다면 열을 더 가하고 여는 도구를 끼울 수 있을 만큼 충분한 틈이 생길 때까지 스크린을 위아래로 부드럽게 들었다 놨다하여 접착제를 약화시키세요.

[title] Lift the screen slightly
-[* black] Pull up on the suction cup with firm, constant pressure to create a slight gap between the screen and the frame.
+[* black] Pull up on the suction cup with firm, constant pressure to create a slight gap between the screen and the metal frame.
+ [* icon_note] A [guide|10588|plastic bezel|stepid=132754|new_window=true] is secured to the underside of the display, and needs to lift up with the display. Inserting a pick between the bezel and the display will damage the panel.
[* black] Insert an opening pick into the gap [https://guide-images.cdn.ifixit.com/igi/ntCBD1dIfEBFIeTL.full|under the screen's plastic bezel|new_window=true].
+ [* icon_caution] Make sure the opening pick is placed ***under*** the plastic bezel (against the frame) to avoid damaging your screen.
[* icon_note] The watertight adhesive holding the screen in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your tool.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.